Pneumatic actuators drive pneumatic ball valve principle
One of the pneumatic actuators is called the pneumatic ball valve, which literally means the pneumatic actuator is used as the driving mode of the ball valve. It is a widely used pneumatic valve.
The working principle and related knowledge of the pneumatic ball valve in the pneumatic actuator: the pneumatic ball valve and the plug valve belong to the same type of valve, only the closed part is a ball, the pneumatic ball valve in the pneumatic actuator rotates around the center line of the valve body to open and close. The pneumatic ball valve in the pneumatic actuator is mainly used to cut off, distribute and change the flow direction of the medium.
The pneumatic ball valve in the pneumatic actuator can be divided into floating ball, fixed ball and elastic ball.
The working principle of the pneumatic ball valve in the pneumatic actuator is to make the valve unblocked or blocked by the love of the rotary valve. Pneumatic ball valve switch light, small volume, large caliber, reliable sealing, simple structure, easy maintenance. The sealing surface and the sphere are often closed and not easily eroded by the medium. It has been widely used in various industries.
Pneumatic valve in the pneumatic actuator is also a popular valve body, a wide range of applications. Understand the working principle of pneumatic actuator pneumatic ball valve is also to let customers have a better choice.
The standard air supply pressure of most pneumatic actuators is 00.4 ~ 0.7mpa. First, check whether the air pressure of the pneumatic actuators is too low. If the air supply pressure is lower than the above, it should be corrected in time.
