产品展示

Product Center

Product Center > Straight stroke pneumatic actuator

current position: Home > Product Center > Straight stroke pneumatic actuator
Straight stroke pneumatic actuator

Straight stroke pneumatic actuator

  • Category:Straight stroke pneumatic actuator
  • Browse number:
  • QR code:
  • Release time:2022-08-12 13:55:02
  • Product description

Introduction to Straight Stroke Pneumatic Actuator
1、 Product introduction
FQG series straight stroke actuator is an actuator that uses compressed air as power to complete the execution. It can execute a series of directly opened valves, such as gate valve, stop valve and slurry valve. The actuator is divided into two kinds of executive actions: double action and single action. The double action actuator is driven to open and close by the air source pressure; The single action actuator is opened or closed by air supply pressure, and the other action is driven by spring force. The control mode of the actuator can be switch type or adjustable type according to the working conditions. The actuator is usually an integrated structure, and the actuator and regulator are unified.
2、 Structural characteristics
1. The cylinder barrel of the actuator is made of high-quality aluminum alloy grinding pipe, which is hard anodized (with a diameter greater than 300), durable and has high output efficiency.
2. The piston rod surface is treated with pre rolling hardening, hard chrome plating, fine grinding, good wear resistance, rust prevention and other characteristics.
3. The sealing ring adopts special rubber products, which can work without oil lubrication, with low starting pressure and long service life.
4. The front cover of the actuator is equipped with oil bearing, which has low friction coefficient. The whole body is treated with electric melting anti-corrosion technology, which is beautiful and durable.
5. The end of stroke can be buffered according to the working conditions, and the actuator stroke can be mechanically adjustable; Hand wheel mechanism can be selected to realize on-site emergency operation.
3、 Technical parameters
1. Working medium: filtered clean compressed air
2. Higher working pressure: 1.0Mpa
3. Ambient working temperature: generally - 5~80 ℃, specially - 25~200 ℃
4. Speed: 50~500mm/s
5. Service life: ≥ 1000km
6. Output thrust: up to 50 million N
4、 Quality assurance
1. IS Therefore, the implementing agency is certified in strict accordance with 09001-2008 quality system and IS produces 9001 quality system.
2. The actuator shall be 100% inspected when leaving the factory, with inspection report attached.
3. Solenoid valve, filtration and pressure reduction. Positioner and other actuator control accessories are adopted by international high-quality brands.

直行程气动执行器

Tags

Next:None

Recently Viewed:

Related products

news.related_news

Copyright © Wenzhou Mocheng Automatic Control Valve Co., Ltd All rights reserved record number:浙ICP备19000689号-1 Mainly engaged inPneumatic actuator,Pneumatic valve actuator,Manufacturer of pneumatic valve, Welcome to inquire!
Technical Support: Wenzhou Successkj Co., Ltd

As the new Advertising Law stipulates that absolute words are not allowed to appear on all pages, we support and follow the Advertising Law. In order not to affect consumers' normal browsing, the company has been urgent to check and modify the obvious areas of the shop page, and hereby solemnly states that all absolute words of the shop are invalid and not used as compensation reasons; The company will never accept and compromise the online fraud in the name of fighting against counterfeits in any form. Please make way for real consumers. The protection of rights is two-way. I hope all consumers will understand, and those who are trying to seek illegitimate interests will appreciate it!